Gasketed plate heat exchanger VHX51

VHX supply plate heat exchangers from 0.03m2 to 1.8m2 for different application requirements. We manufacture gasketed plate heat exchanger for replacement models and our own brand models, available calibre from DN25 to DN350.

Model Height Width Min Standard Length Max Standard Length Vertical Port Distance Horizontal Port Distance
VHX25 480 180 20 350 357 60
VHX51 940 330 35 600 640 140
VHX52 920 320 25 450 640 140
VHX61 835 325 50 630 625 130
VHX62 1085 325 50 630 875 130
VHX101 1084 470 120 950 719 225
VHX102 1084 470 80 640 719 225
VHX103 1235 500 115 1125 882 234
VHX104 1655 500 115 1125 1302 234
VHX151 1885 650 235 1410 1294 298
VHX152 1885 610 160 1255 1294 298
VHX201 2055 730 235 1645 1478 342
VHX301 2086 1125 215 2580 1320 600
VHX351 2920 1190 210 3360 1842 596

Available plate material: AISI304/AISI316/Titanium/Nickel/Alloy C-276/254 SMO
Available gasket material: NBR/EPDM/HNBR/NBR-HT/EPDM-HT/Viton-A/FKM/Viton-G/FKM/CR
Available connection material: rubber/stainless steel/unlined/flange

Get In Touch

Recommend Read

  • Brief Introduction of Our Company

    Liaoning Victory Industry Co.,Limited is a leading manufacturer in the heat exchanger industry with over 15 years of experience and specialize in heat exchanger & spare parts. We produce replaced plates and gaskets for Alfa Laval, APV ,GEA, Sondex , Vicarb ,Tranter, API/Schimidt Bretten, Hisaka, Funke, Thermowave,VIEX and etc.

    Our parent company Dayuanplate own one plate heat exchanger manufacturing base, one plate heat exchanger sealing gasket factory, one boiler factory and a R&D center.

    Dayuanplate is a technology R&D type enterprise, We developed three different series products can meet demands for different industries.

  • Good Maintenance for Plate Heat Exchangers

    Just like a car or a computer, a heat exchanger needs regular maintenance to keep running at peak performance. Fortunately, PHE’s are generally easier to maintain than other types of heat exchangers, and problems tend to be easier to diagnose.

    In the absence of regularly scheduled maintenance, a PHE’s efficiency naturally declines. The simple reason for this is plate fouling – as matter builds up in the grooves of a plate, the heat transfer capacity of that plate diminishes (because the fouling is less thermally conductive than the plate itself). The more scaling there is on a plate, the faster it continues to foul, so it’s important to catch the issue early to avoid extended downtime and excessive maintenance costs.

    While less likely, other parts of a PHE can fail as well. It’s important to visually inspect the gaskets, frame and bars whenever you open up the heat exchanger for any kind of maintenance. A habit of cursory visual examinations can save a lot of time and money in the long run.

  • Exclusive Distributor of VHX in European Market

    2017 is a very important year for Liaoning Victory Industry Co.,Limited . With our popularity in the international heat exchanger market, more and more heat exchanger distributors want to represent our products. After very careful market research and business review, we finally selected a representative company TherMaPlate in the European market, and signed an exclusive agency agreement with them.

    Since then, we have own another overseas inventory base in Europe, in order to serve heat exchanger customers better, we welcome customers in the European market to contact our agents TherMaPlate to get more information. 

  • Precautions for heat exchanger plate during commissioning

    Because the heat exchanger plate works for a long time, the surface of the heat transfer plate will produce different degrees of dirt or deposits, thereby increasing the flow resistance and reducing the heat transfer performance. These are mainly the pressure difference between the inlet and outlet pressure gauges and the temperature of the cold medium outlet. Reduced, so we have to clean it, we need to debug the experiment after the cleaning is completed to ensure the normal use of the product, then what are the things we need to pay attention to during the debugging process?
    1. Reserve a certain inspection site around the location of the flat plate heat exchanger.
    2. Before installing the apv plate heat exchanger, clean the pipeline connected to it to prevent sand, oil, welding slag and other debris from entering the plate heat exchanger, causing obstruction of the flow channel or damage to the plate.
    3. When the plate heat exchanger is stopped and stopped in sequence, first close the high-pressure side medium solenoid valve, and then close the low-pressure side medium solenoid valve. When starting up, first open the low-pressure side medium plunger valve, and then open the high-pressure side medium plunger valve slowly after the medium fills the plate heat exchanger channel.
    4. Check all clamping bolts for looseness before putting into use. If necessary, tighten them. In recent years, plate heat exchangers have replaced traditional shell-and-tube heat exchangers in airports, hotels, commercial buildings, etc., and have achieved good results.
    5. Maintenance and maintenance:
    If there is a large amount of muddy sand or debris in the medium, the supporting decontaminator produced by Weike should be placed in front of the plate heat exchanger. The gasket heat exchanger has a low fouling coefficient, and the fluid violently rolls between the plates to form a turbulent flow. The excellent plate design avoids the existence of a dead zone, so that impurities are not easily deposited and blocked in the channel, and a good heat exchange effect is ensured.
    The above is all the things we need to pay attention to during the debugging process after cleaning. We only know these things to ensure the product usage rate.
    Weike is a manufacturer of environmentally friendly plate heat exchangers. We believe that the company's technical design capabilities, manufacturing capabilities, enterprise scale and after-sales service will win your trust.
  • Victory’s Preparation for the Peaking Season of Year 2019

    Liaoning Victory Industry Co., Ltd is an experienced manufacturer of plate heat exchangers. We have
    4 sets hydraulic presser, the largest one is 14000 tons. We are capable of pressing 300000 pieces plate every year. Our heat exchanger available from DN25 to DN400, widely used in many difference industries. Including Steel and metal works, Power and energy production, Chemical process industries, Petroleum industries, Refrigeration, Engineering industries, Central cooling engineering, Metal recovery industries, Mineral processing industries, Sugar, distillery fermentation, Pulp and paper industries, Dryers for compressed air, Heating, ventilation and air conditioning.

    Besides supplying the product of high quality to our esteem customers, service is also our career pursue. As the New Year and Spring Festival is approaching, our factories also prepared for the holiday, we have stocked plate and gasket for all models to fulfill the customers need during our off work time.

    We have plate stocks of 1000 pieces for our urgent customer needs, 3000 pieces gasket stocks for more than 200 models replacement.